|
The AWQ-104L electric acupuncture machine with 4 point locator is a newly designed unit. It features a large LCD digital meter that can display and fine-tune frequency selection through two separate ranges: 1-100 Hz ( low) and 10 - 1000 Hz (Hight). Our electroacupuncture units are completely equipped with superior features in all aspects. This is one of the most powerful acupuncture with electrical stimulation available in the market.
The AWQ-104L electro-acupuncture device is the latest improved version of the multipurpose WQ-10 electro-acupuncture device series. This electro acupuncture stimulator features four output channels and a large 0.5" x 0.9" LCD digital meter that displays the acupuncture stimulation frequency and the point location.
The acupuncture stimulator can show and fine-tune the frequency selection through two different ranges: 1 to 100 Hz (Low), and 10 to 1,000 Hz (High).
Our Electric Acupuncture Machine Features:
- 4 individually controlled output channels which provide acupuncture with electrical stimulation to 8 needles
- Polarity Reversal [i.e. tonification (-) and sedation (+)] switches for each channel
- Hi/Low voltage switch, and two frequency ranges (X1, X10)
- Newly integrated circuitry that assures no interference or crossover
- Powered by 9-volt battery
The electronic acupuncture device is also capable of delivering micro-current when the intensity is set just below the sensorial threshold level. The "Loc" or "Stim" settings of this electro-acupuncture stimulator allow the hand-held probe to either locate or treat points. The output and polarity of this hand probe are both regulated by Intensity Dial 1. The acupuncture stimulator machine also offers three adjustable pulse modes, which are - continuous, intermittent (discontinuous), and dense-disperse.
Package Includes:
- AWQ-104L Electro Acupuncture Machine with 4 Point Locator
- 5" Long pen shaped search/treat probe with hand ground pole and wire
- 4 Sets of alligator clip wires, sturdy carrying case
- 9 Volt battery
- Instructions
- 1-year warranty from the date of purchase.
So Why Wait? Buy This Electric Acupuncture Machine Today and Enjoy the Amazing Health Benefits of Electro-Acupuncture Therapy!
| Specifications |
500 ohm test load |
| Output Channels: |
5 (1 hand probe, 4 intensity channels) |
| Frequency meter: |
LCD, 0.5" x 0.9"
X1 1 to 100 Hz
X10 10 to 999 Hz |
| Frequency light: |
Green LED light |
| Volts and current: |
Low 0 to 9 volts, 0 to 18 mA (milliamps)
High 0 to 20 volts, 0 to 40 mA (milliamps) |
| Pulse width: |
X1 320 microseconds (µS)
X10 32 microseconds (µS) |
| Pulse shape: |
Asymmetric biphasic square wave with negative spike |
| Pulse modes: |
Continuous, intermittent (discontinuous),
or dense-disperse (rate modulation) |
| Skin impedance monitoring: |
Meter displays value 1 to 100 or 150, green LED light, and sound |
| Polarity reversal: |
For Each Channel |
| Power source: |
9-Volt battery |
| Low power indication: |
Yellow LED light |
| Size, weight, color: |
6" x 4.2" x 2.2", 330 gm, Gray |
| Jack size: |
3.5mm |
|
